Industrial,Construction and Steel Industry

The Industrial Revolution was one of the historic events that changed our life in almost all ways imaginable. It was an explosion that changed the food we eat, the clothes we wear and even the language we speak. It propelled the growth of European population, lead to the expansion of Western culture, it shaped the world as we know it. Thanks to the Industrial Revolution and the string of consequences attached to it, the standards of living throughout the globe rose, initiating in Europe, and then all over the world. A revolution that made slavery a thing of the past. Today even the poor can afford to wear shoes and not only the rich drive automobiles. Status symbols of the past have become commodities of the masses, playthings of the rich have become hobbies of the middle class, all this thanks to the series of events called the industrial revolution.

Yet industry is blamed today and it is blamed for a wide variety of problems. We blame industry for polluting our globe, we blame machines for making us overweight, we blame it for destroying our tropical rainforests. We forget however, how far the industrial revolution has brought us. We tend to despise industry and their worldly ambassadors, industrial buildings, for they are loud and they smell bad. Basically, they are the last place we want to live next to.

Industrial steel buildings however are just as necessary for our way of living as roads and electricity are. They should not be looked upon as a necessary evil, for most people tend to think of old, smelly factories where workers would work amongst loud, heavy machinery around the clock, and that is mostly an outdated stereotype. It is true that most industrial steel buildings today are built to ensure efficiency, they are built not to fit with a specific set of aesthetic ideals, but to produce items that are part of our everyday life. Regardless, industrial metal buildings today do not have to be an ugly sore to the eye. Nowadays they are built with the most modern materials and techniques, which makes them not only dependable, and energy efficient (and thus less of an environmental threat) but also less of an eyesore, and more of harmonic part of urban architecture.

It is an interesting observation, that one of the key propellers of the industrial revolution is the revolution itself. For progress in techniques of production and materials further facilitate the production of high quality industrial materials and other products. An example can easily be made: if it wasn’t for the progress in metallurgy of the past few centuries, the material which is the key component of modern industrial buildings would not exist. Though the 20th century was famous for the industrial era, the 21st century also seems to be characterized by industry. All over the planet we devote more and more land to evolve new industries, plants, companies and industrial areas.

Without any doubt, the boosting industry is not good for the Earth – so let’s take it as granted: if you are about to raise your own industrial park, do it the most eco-friendly way! It is possible!

Having decided your company profile the first thing to consider is the construction material. Earlier it was common to erect giant traditional plants from brick as it was the only available material and it was supposed to be tough and weather-resistant. However, times have changed and now companies tend to plan business for less then a lifetime, usually only for a few years. Many people are involved in the business for a couple of years, then they decide to do something completely different, and they just let the vacant buildings decay in no-time. You must have seen several abandoned plants in the middle of nowhere… This is exactly what I am talking about.

Well, if you want to prevent this, simply use steel. Steel is suitable to erect industrial buildings: you only need to decide about the size, layout and design. Evolving your own industrial steel building has never been so easy!

Metal industrial buildings come in pre-punched, pre-drilled elements, so instead of professional skills you will only need a little common sense.

And probably the best thing in metal industrial buildings is that they are incredibly easy and fast to set up and pull down. So whether you are thinking to change your company profile or you want to move to the Far-East – you can, because steel industrial buildings are easy to transport, due to its element structure.

Security and safety are other important facts. Metal industrial buildings meet safety and hygiene standards better then regular materials and they are fire-resistant. They are easy to keep clean and an adequate insulation will provide perfect conditions, should you have a fully equipped process factory or offices in a multinational company.

How to Do Basic Home Repair Like Re-Levelling a Sunken Floor

Many a home owner can save tons of money by doing the work themselves. All they need is a little guidance in the right areas.

Take a sagging floor for instance. You might look at the floor as a fixed immovable object but in reality it is generally suspended in the air atop posts and beams. The scope of this article is not able to cover a sunken concrete floor. That is an entirely different matter.

Now back to the sunken wooden floor. Under it is either a crawl space or maybe a basement and you would need to determine where the floor is sunken to be able to find the support member that needs to be repaired. This is pretty easy to do with a level.

Go to the room that has the most noticeable lean in the floor and lay the level on it to see which direction the floor falls. Now go all around the room and lay the level in different directions to find the lowest point. Sometimes the lowest point is in a different room but it is pointing to where the repair needs to take place.

Some of the causes of sinking are rotted wooden members that support the floor, the concrete or stone pier has sunken into soft earth possible from having the soil under the pier being disturbed during excavation and not getting it compacted before placing the pier or there was a shift in the earth below and it cause an area of the house to sink.

All of these causes can be fixed so do not despair. There are simple and easy to apply steps you can take to do the job yourself.

The main tools you will need are;

• 25 ton or bigger jacks (you should have two of them. You can get away with 12 ton jacks but it is harder to pump them.) Or house screw jacks.
• Pressure treated lumber for new posts like 4X4 or 4X6 to go under the beam and down to the concrete pier.
• Some 2X4 pieces to nail the posts to the beams when done or metal straps if you like.
• A hammer,
• A sledge hammer,
• 4 two foot pieces of 2X6
• 2 pieces of 1′X1′ 3/4″ plywood for the jacks to stand on.
• A good 4′ or longer level
• clean plastic sheet to lay on under the house

Now that you have all the tools ready and you have located the part of the house that is low. It is time to get to work. You will want to be close to the post when you jack up the beam. That way you are only lifting the low end of the beam and not trying to lift the whole beam from the middle.

Generally two beams meet over a post and you will need two jacks to safely lift each beams weight off of the post. Once. To place the jacks properly you first lay down the 2X6 pieces side by side (2 of them) and then you lay the 3/4″ plywood on top of them in the middle then the jack goes on top of that. This gives you a nice big footing to lift from. Make sure the platform you build is level. The jack has to be pointing straight up and down to work safely.

The last thing you want is a leaning jack with a bunch of house weight sitting on it and it decides to fall over. Work safe and you will have a good time fixing the sunken floor.

Now begin lifting the beam or beams up If two beam ends are being lifted they need to go up at the same rate and height. Now go and check the floor periodically to make sure you are getting it level. You may hear some loud popping and creaking sounds. This is natural so don’t be alarmed.

If you have to lift the floor up more than 1/2 to 1″ you may get some cracks in the walls and they are just cosmetic so they can be patched without too much difficulty. Doors may also not fit their openings if you had to lift a wall with a doorway in it.

Once you have the floor level again give it a pump or two more on the jack and cut yourself a new post to fit the new gap from the beam to the concrete pier. Place a piece of tar paper on top of the concrete pier and then the new post on top of the tar paper so the wood cannot touch the concrete. This will prevent the wood from rotting. The wood should also be pressure treated.

If there are two beams make sure the joint lands in the center of the new post and then lower the beams to the post. Now take the 2X4 pieces and lay them against the beam and down each side of the post and nail them together.

You are now done and can pick up all your tools. This is the time when you experience the pride of doing the work yourself.

If you are lifting beams in a basement you would use pole jacks for safety and ease of use. You still want to build the wooden base for the jacks to stand on so you don’t take a chance of cracking the concrete floor.